Inquiry Basket (
Home » Product List » Wind Turbine Generators » 1.5kw Wind Turbine Generator (GL-PMG-1500)
Product Details
1.5kw Wind Turbine Generator (GL-PMG-1500)
| Packing: | Packing Suitable for International Shipping |
|---|---|
| Model NO.: | GL-PMG-1500 |
| Standard: | 1.5kw |
| Productivity: | 3, 000 PCS/Month |
| Shipment Terms: | Courier, Normal Air Cargo and Sea Delivery |
| Minimum Order: | 1 |
| HS Code: | 8503003000 |
| Trademark: | Ginlong |
| Origin: | China |
| Output Power: 1.5kw: | Rated Rpm: 550 |
| Export Markets: | North America, Eastern Europe, Western Europe |
Product Description
*Low start up speed due to low cogging and resistive torque design.
*Gearless, direct drive, low RPM generator.
*High standard, quality components for use in harsh and extreme environments for wind turbines.
*High efficiency and Low mechanical resistance energy loss.
*Excellent heat dissipation due to the Aluminium alloy outer frame and special internal structure.
*High strength from the specially desy selecign structure and fully heat treatment Aluminium.
*Generator is designed using speciallted material and treated to resist corrosion and oxidation.
*Designed for reliable and long operational lifetime under long-term full output.
*Designed for 20-year operation life.
*Patent protected design.
| Model number: | GL-PMG-1500 |
| Rated Rotatoin Speed(RPM) | 550 |
| Rated Output Power(W) | 1500 |
| Outer frame material |
High standard Aluminium alloy with TF/T6 heat treatment (TF/T6 full heat treatment for increasing the performance of aluminium alloy as follows. Heat 4-12 hours at 525-545 degrees Celsius, quench with hot water, and precipitation heat treatment for 8-12 hours at 155-175 degrees Celsius. ) |
| Outer frame finish | Aluminium surface is anodised then power painted for anti-corrosion protection |
| Shaft material | High standard Stainless Steel |
| Shaft bearing | High standard NSK 6207DDUC3 (Front) NSK 6207VVC3 (Rear) |
| Weight(Kgs) | 17.2 |
| Rotor inertia (Kg. m 2 ) | 0.011 |
| Fasteners (nuts and bolts) | High standard Stainless Steel |
| Lamination stack | High specification cold-rolled Steel |
| Windings temperature rating | 180 degrees Celsius |
| Magnet material | NdFeB (Neodymium Iron Boron) |
| Magnets temperature | Rated at 150 degree Celsius |
| Generator configuration | 3 Phase star connected AC output |
| Safety | Capable of withstand short term shorting of the windings for braking effect at rated rotation speed. Class 1 electrical safety rated for prevention of electrical shocks. |
| Starting torque(NM) | < 0.7 |
| Phase resistance(ohms) | 0.3 |
|
Recified DC Current at Rated Output(A) |
30 |
| Requied Torque at Rated Power(NM) | 35 |
| Output Wire Square Section(mm 2 ) | 4 |
| Output Wire Length(mm) | 600 |
